Lexicon Lambda User Manual

level using the output level of the recording deck or the input level of the control room
amplifier or speakers.
MIxING WITHIN CUBASE
®
LE 4
You can mixdown directly within Cubase
®
LE 4 or other recording software, and burn
an audio CD from that mix (provided your computer has a CD-R drive). Consult
the Cubase LE 4 online manual or documentation for your recording software for a
complete description of mixing within the software.
CONNECTIONS dIAgRAM
WINdOWS
®
SOFTWARE SETUP
You should consult the included Software Installation Guide to ensure the successful
installation of the recording software and USB drivers.
If you haven’t already installed the Cubase LE 4 and Lexicon
®
Pantheon™ plug-in
software, please do so before continuing on to the next section. Follow the on-screen
instructions to install the USB drivers.
WINDOWS vISTA AND xP
You must install the USBdrivers after you’ve made the connection between your
computer’s USB port and the USB port of the Lambda Studio™.
Connections Diagram
16

Lexicon Lambda Specifications

General

Type	USB Audio Interface
Phantom Power	Yes
Sample Rate	44.1kHz, 48kHz
Bit Depth	24-bit
Mic Preamps	2
USB	USB 1.1
Inputs	4 (2 XLR/TRS combo, 2 line)
MIDI I/O	Yes (1 in, 1 out)
Outputs	2 x TRS