Lexicon Lambda User Manual

MACINTOSh
®
SOFTWARE SETUP
You should consult the included Software Installation Guide to ensure the successful
installation of the recording software.
If you haven’t already installed the Cubase
®
LE 4 and Lexicon Pantheon™ plug-in
software, please do so before continuing on to the next section.
MAC OS
A USB device must initialize itself with the host computer to operate correctly. The
Lambda Studio comprises multiple devices (audio and MIDI) and each of those must
be initialized. Some Macintosh
®
computers will not recognize all of these devices if
the Lambda Studio is connected to the USB port before the computer is turned on. The
simplest way to avoid problems is to connect the Lambda Studio to the USB port after
the computer is booted.
Macintosh Software Setup
17

Lexicon Lambda Specifications

General

Type	USB Audio Interface
Phantom Power	Yes
Sample Rate	44.1kHz, 48kHz
Bit Depth	24-bit
Mic Preamps	2
USB	USB 1.1
Inputs	4 (2 XLR/TRS combo, 2 line)
MIDI I/O	Yes (1 in, 1 out)
Outputs	2 x TRS