The Algorithms
3-1
3
The Algorithms
The LXP-15 contains five effects algorithms: Delay/Reverb, Pitch/Delay, Gate,
Plate, and Chorus Delay. When a preset or register is loaded, its algorithm is
shown in the top line of the display. (See Chapter 5:
The Presets
for a list of the
algorithms used in each preset.)
The algorithm parameters are grouped by function onto five pages: Delay, Pitch
EQ, Reverb, Levels and Mod. This format allows you to find the delay parame-
ters, for example, at the same page and display location in each algorithm.
Parameters which are not available in an algorithm are assigned a blank space
to maintain this format.
NOTE: You can change the current algorithm by turning the PAGE knob to
"Alg" and using ADJUST to select a different algorithm. Be aware that different
algorithms have different parameters. Changing algorithms with ADJUST
may cause some parameters to be set to undesireable values. For this
reason, when you want to work with a different algorithm, select and load a
preset or register with the desired algorithm. This ensures that all parameters
are set to normal values.
The general signal flow through the LXP-15, as well as the features and
parameters of each of the five effects algorithms are described on the folllowing
pages.
The general signal flow through the LXP-15 is illustrated below.
Output
L
Input
L
Input
R
Mix
Output Level
Dry Pan
Wet Pan
Dry Pan
+
+
Mix
Output Level
Effects
Algorithm
Input
Level
Front Panel
Input Knob
Front Panel
Output Kno
Signal Flow
To Next Page
Loading...
Need help?
General
