1-3
Installing the LXP-15
AC PWR
AUDIO
IN OUTTHRU
Dynamic MIDI
FOOT
CONTROLLERS
1 234
L OUTPUTS R L INPUTS R
5
LXP-15
Rear Panel
Connectors
Outputs (L and R)
Single-ended (unbal-
anced) stereo outputs pro-
vide +4dBu nominal out-
put level. Either can be
used for mono output.
MIDI OUT
Transmits MIDI data to
other equipment.
Inputs (L and R)
Single-ended (unbal-
anced) inputs accept lev-
els as low as -26dBu. In-
put impedance is 50 kΩ in
stereo, 25 kΩ in mono. Ei-
ther can be used for mono
input.
Foot Controllers
Five connectors for toggle
(Push on/push off) mo-
mentary contact foot
switches, or continuous
footpedals (50 kΩ).
MIDI THRU
Passes any MIDI data re-
ceived without change.
MIDI IN
Receives MIDI informa-
tion from other MIDI
equipment such as mas-
ter keyboard controllers,
MIDI foot controllers, se-
quencers and synthesiz-
ers.
AC Power
To Next Page
Loading...
Need help?
General
