EasyManuals Logo

Lexicon LXP-15 User Manual

Lexicon LXP-15
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
The Algorithms
3-7
DELAY
Predely PdlyFbk Delay L Feedbak Delay R
0-1.04s 0-100% 0-325ms 0-100% 0-325ms
(64µs steps) (20µs steps) (20µs steps)
PITCH EQ
Pitch Intervl PchFine HiCut LoCut
On, Off -2oct to +1oct -64 to +63 320Hz-11.6kHz, Full,
(in semitones) (128 steps) Full 19Hz-1.35kHz
REVERB
Decay Treble BassMpy Size Diffus
.6-6.1s, 320Hz-11.6kHz, .35x-2.50x 8M-33M 0-100%
Infinite Full
LEVEL
InLevl Mix Wet Pan Dry Pan OutLevl
0-100% 0-100% 100%L-51%L, 100%R-51%R, 0-100%
Center, Center,
51%R-100%R 51%R-100%R
MODULATION
LFO Rat Rvb Mix - - -
.03Hz-4.84Hz 0-100%
Parameter pages in
the Pitch/Delay algorithm
Predelay: The master predelay for the algorithm, providing as much as 1.04
seconds of delay. It serves as the base delay for the pitch shifter and stereo
delay. It can also be used to capture and loop up to 1.04 seconds of audio to
create loop sampler effects.
When creating patches, Predelay is controlled from two patch page parameters.
Pdlyhi provides coarse control over the entire delay range for the parameter (0-
1.04s). Pdly provides fine control over a smaller range (0-16.1ms).
Predelay Feedback: A postive feedback loop around predelay. When set to
maximum (100%), it locks out further input and begins an infinte loop with a
length equal to the current setting of Predelay.
Delay L: Reverb predelay and source for left channel unreverberated signal and
feedback. Like Predelay, Delay L is controlled from two patch page parameters.
DlyLhi provides coarse control over the entire delay range for the parameter (0-
325ms). DlyL provides fine control over a smaller range (0-5.04ms).
Feedback: A positive feedback loop around the pitch shifter, EQ and Delay L.
When the pitch shifter is enabled, feedback will produce
cascade
effects. Short
Delay L times will produce chords; long Delay L times will produce arpeggios.
The higher the feedback setting, the more notes in the chord or arpeggio. If HiCut
or LoCut are set to produce roll-off, feedback will increase the roll-off with each
recirculation. When set to maximum (100%), feedback continues to add input
signal into the feedback loop.
Delay R: Delay for right channel unreverberated signal. Like Predelay, Delay R
is controlled from two patch page parameters. DlyRhi provides coarse control
over the entire delay range for the parameter (0-325ms). DlyR provides fine
control over a smaller range (0-5.04ms ).
Pitch/Delay parameters

Other manuals for Lexicon LXP-15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexicon LXP-15 and is the answer not in the manual?

Lexicon LXP-15 Specifications

General IconGeneral
BrandLexicon
ModelLXP-15
CategoryRecording Equipment
LanguageEnglish

Related product manuals