Audio Controls Lexicon
4-2
AUDIO CONTROLS
Selecting the MAIN MENU AUDIO CONTROLS option opens the AUDIO CONTROLS menu, to customize the Main Zone, Zone 2, and Record
Zone audio output connectors.
• The BASS, TREBLE, TILT EQ, LOUDNESS, BALANCE, and FADER
parameters affect the Main Zone audio output connectors. This
includes all Main Zone inputs and listening modes, except the
5.1mc BYPASS and 2CH BYPASS listening modes.
• The ZONE2 BALANCE parameter affects the Zone 2 audio
output connectors, including all Zone 2 inputs.
• The REC BALANCE parameter affects the Record Zone audio
output connectors, including all Record Zone inputs.
Note:
When LIVE! is active, the BASS, TREBLE, TILT EQ, and LOUDNESS
controls do not function and the corresponding parameters are shown
in the AUDIO CONTROLS menu as set to +0.0dB. The LOUDNESS
parameter is shown as set to OFF.
AUDIO CONTROLS menu parameter descriptions begin on the next page.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
AUDIO CONTROLS
BASS
TREBLE
TILT EQ
LOUDNESS
BALANCE
FADER
+0.0dB
+0.0dB
+0.0dB
OFF
<I>
<I>
ZONE2 BALANCE
RECORD BALANCE
<I>
<I>
ON
OFF
B< <L> >FL< <L> >R
-6.0 to +6.0dB
-3.0 to +3.0dB
Parameter
Default Setting
Possible Settings
BASS +0.0dB -6.0 to +6.0dB
TREBLE +0.0dB -6.0 to +6.0dB
TILT EQ +0.0dB -3.0 to +3.0dB
LOUDNESS OFF ON, OFF
BALANCE <|> L< to <|> to >R
FADER <|> B< to <|> to >F
ZONE2 BALANCE <|> L< to <|> to >R
REC BALANCE <|> L< to <|> to >R
To Next Page
Loading...
