MC-12HD Mode Adjust
5-15
2-CH SURROUND
This mode, designed for playback of stereo sources, sends the left
channel to Front, Side, and Rear Left channels and the right channel
to Front, Side and Rear Right channels, and sums the Left and Right
for the center. It is recommended for background music.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-37 for detailed
descriptions
.
2-CHANNEL
This mode, designed for playback of stereo sources, sends the left and
right channels to the Front L/R and Subwoofer channels. It is recom-
mended for two-speaker playback with subwoofers and for
comparison purposes with other listening modes.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-37 for detailed
descriptions
.
MONO LOGIC
This mode, designed for playback of mono sources, uses proprietary
Lexicon reverb algorithms to realistically expand mono sources to
use all channels. This dramatically increases the perceived width
and sense of envelopment of the listening space.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-37 for detailed
descriptions
.
Note:
When the remote control Shift command bank is activated, pressing the
TVL button activates the MONO LOGIC listening mode for 2-channel
sources.
Parameter
OUTPUT LEVELS Refer to page 5-35
CUSTOM Refer to page 5-35
Parameter Default Setting Possible Settings
SUB L/R LVL +0dB OFF, -30dB to +12dB
CUSTOM Refer to page 5-35
MODE ADJUST 2-CH SURROUND
MODE ADJUST 2-CHANNEL
Parameter Default Setting Possible Settings
EFFECT LVL -9dB -12dB to +6dB
ACADEMY FILTER ON ON, OFF
SURR ROLLOFF 3.1kHz 500Hz to 20.0kHz, OFF
OUTPUT LEVELS Refer to page 5-35
CUSTOM Refer to page 5-35
MODE ADJUST MONO LOGIC
To Next Page
Loading...
