MC-12 Audio Controls
4-3
BASS -6.0dB to +6.0dB
Controls the amount of low-frequency boost or cut applied to the
Main Zone audio output connectors labeled Front L/R, Center, LFE,
and Subwoofer L/R. The graph to the right indicates the frequency
response of all BASS parameter settings.
To control the bass from the remote control:
Press the Shift button:
•Press the CD button to increase the BASS parameter setting in
0.5dB increments.
•Press the TAPE button to decrease the BASS parameter setting
in 0.5dB increments.
•Press the OSD button to set the BASS, TREBLE, and TILT EQ
parameters to +0.0dB.
AUDIO CONTROLS
BASS
The BASS parameter controls the amount of low-frequency boost or cut applied to the
Main Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R.
BASS
To Next Page
Loading...
