EasyManua.ls Logo

Lexicon MC-12HD - Input Select Parameter Settings

Lexicon MC-12HD
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC-12HD Setup
3-21
INPUT SELECT PARAMETER SETTINGS
DIGITAL ANALOG AUTO
The MC-12HD sends the digital audio from
the assigned input to the Main Zone audio
output connectors. The assigned analog
audio input connector is ignored.
The digital audio input connectors are
compatible with PCM (44.1, 48, 88.2,
and 96kHz), Dolby Digital, and DTS(-ES)
sources. The digital audio input
connectors are not compatible with
MPEG or MP3 sources.
Note the following:
The MC-12HD automatically sets the
INPUT SELECT parameter to DIGITAL
when no analog audio input
connector is assigned.
•The INPUT SETUP DIGITAL IN
parameter can assign a digital audio
input connector for the selected
input.
The MC-12HD sends the analog audio from
the assigned input to the Main Zone audio
output connectors. The assigned digital audio
input connector is ignored.
Note the following:
The MC-12HD automatically sets the
INPUT SELECT parameter to ANALOG
when no digital audio input connector is
assigned.
The INPUT SETUP ANALOG IN
parameter can assign an analog audio
input connector for the selected input.
When LIVE! is the selected analog input,
the MAIN ADVANCED INPUT SELECT
parameter is forced to ANALOG and
ANALOG BYPASS is disabled.
The MC-12HD toggles between sending digital or
analog audio input to the Main Zone audio output
connectors based on the input source that is
present.
Example:
The MC-12HD selects the assigned digital
audio input when a compatible digital
source is present. The MC-12HD does not
select the assigned analog audio input
when a compatible digital source is
present.
The MC-12HD selects the assigned analog
audio input connector when no compatible
digital source is present.
The MC-12HD selects the assigned analog
audio input connector when an analog
source, such as an SACD, is present, only
when no digital source is present.
Note the following:
The MC-12HD automatically sets the MAIN
ADVANCED INPUT SELECT parameter to
AUTO when both digital and analog audio
input connectors are assigned.
Use the AUTO setting for components, such as
DVD/SACD players, that generate both digital
and analog output signals.

Table of Contents

Other manuals for Lexicon MC-12HD

Related product manuals