MC-12HD Basic Operation
2-11
REMOTE CONTROL OVERVIEW
The MC-12HD remote control provides full operation of the
MC-12HD, including commands such as menu navigation that are
not available from the front-panel. The command matrix, beginning
on page 2-15, indicates the commands remote control buttons
perform when each command bank is active. The numbered items in
the matrix correspond with the remote control illustrations.
OPERATION CONSIDERATIONS
The following factors can improve or impede remote control
operation.
Note the following before operating the MC-12HD remote
control:
• The remote control must be in line-of-sight with the front-
panel IR receiver. Eliminate obstructions between the remote
control and the IR receiver. The remote control may become
unreliable if strong sunlight or fluorescent light shines on the IR
receiver.
• For optimal performance, position the remote control at a 30
degree angle no more than 17 feet (5m) from the MC-12HD.
Placing the MC-12HD inside a smoked glass cabinet will reduce
the remote control range.
• Remote controls for different components can interfere with
one another. Avoid using remote controls for different compo-
nents at the same time.
• Remote control batteries should be replaced as needed.
To Next Page
Loading...
