Mode Adjust Lexicon
5-20
5.1 PLIIx MOV
The 5.1 PLIIx MOV (MOVIE) listening mode is designed to playback
7.1 discrete channels decoded from 5.1-channel Dolby Digital film
sources. (The 5.1 PLIIx MOVIE listening mode can also be used with
other types of Dolby Digital sources with mixed results.) The seven
main channels are full frequency. The .1 channel, often referred to as
LFE information, has a limited frequency range of up to 120Hz. The 5.1
PLIIx MOVIE listening mode does not appear in the list of available
listening modes if either the side or rear speakers are missing from
the configuration.
The 5.1 PLIIx MOV listening mode cannot be assigned as the
preferred listening mode. However, the USE LAST parameter allows
you to gain quick access to this mode.
To setup USE LAST using the remote control:
1. Select Main MenuSetupInputsDVD1 (or the desired input).
2. In the INPUT SETUP menu, select D USE LAST.
3. Press the MENU button to leave the menu structure.
Play the source material, then press the button. This will load
5.1 PLIIx MOV for 5.1-CH Dolby encoded sources.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-37.
5.1 PLIIx MUS
The 5.1 PLIIx MUS (MUSIC) listening mode is designed to playback 7.1
discrete channels decoded from 5.1-channel Dolby Digital music
sources. (The 5.1 PLIIx MUSIC listening mode can also be used with
other types of Dolby Digital sources with mixed results.) The seven
main channels are full frequency. The .1 channel, often referred to as
LFE information, has a limited frequency range of up to 120Hz. The 5.1
PLIIx MUSIC listening mode does not appear in the list of available
listening modes if either the side or rear speakers are missing from
the configuration.
The 5.1 PLIIx MUS listening mode cannot be assigned as the
preferred listening mode. However, the USE LAST parameter allows
you to gain quick access to the this mode.
To setup USE LAST using the remote control:
1. Select Main MenuSetupInputsDVD1 (or the desired input).
2. In the INPUT SETUP menu, select D USE LAST.
3. Press the MENU button to leave the menu structure.
Play the source material, then press the button. This will load
5.1 PLIIx MUS for 5.1-CH Dolby encoded sources.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-37.
Parameter Default Setting Possible Settings
EX DECODING AUTO AUTO, ON, OFF
COMPRESSION OFF AUTO, ON, OFF
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS Refer to page 5-35
CUSTOM Refer to page 5-35
MODE ADJUST
5.1 PLIIx MOV
Parameter Default Setting Possible Settings
EX DECODING AUTO AUTO, ON, OFF
COMPRESSION OFF AUTO, ON, OFF
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS Refer to page 5-35
CUSTOM Refer to page 5-35
MODE ADJUST
5.1 PLIIx MUS
To Next Page
Loading...
