EasyManua.ls Logo

Lexicon MC-12HD - Anlg in Lvl; Auto

Lexicon MC-12HD
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC-12HD Setup
3-11
ANLG IN LVL AUTO, -18 to +12 dB
Opens the ANLG IN LVL menu, to adjust the 2-channel (and
5.1-channel when the MAIN ADVANCEDANALOG BYPASS
parameter is set to OFF) analog audio input levels for the selected
input. Analog audio sources have a wide range of levels. To
compensate, the MC-12HD allows independent input level
adjustment of each stereo analog audio input connector. The input
level of the 5.1-channel analog audio input connector is only
adjustable when the ANALOG BYPASS parameter is set to OFF.
* This parameter cannot be adjusted.
Note:
Adjustments made on the ANLG IN LVL menu are applied to the stereo
analog audio input connector assigned for the selected input. When
another stereo analog audio input connector is assigned, these
adjustments are automatically applied to the new connector.
AUTO ON, OFF
Provides automatic adjustment of 2-channel (and 5.1-channel
when the MAIN ADVANCEDANALOG BYPASS parameter is set to
OFF) analog audio input levels. When set to ON, the input levels are
automatically monitored and optimized. When the input signal is
too high, the input levels are quickly decreased to avoid overload.
When the input signal is too low, the input levels are slowly
increased to maximize the signal-to-noise ratio and dynamic range.
When set to OFF, the 2-channel and 5.1 analog audio input levels
are not automatically monitored and optimized. Instead, input
levels must be adjusted with the ANLG IN LVL MANUAL parameter.
Parameter Possible Settings
AUTO ON, OFF
MANUAL -18 to +12dB
AUTO GAIN* -18 to +12dB
ON
OFF
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
DVD1 ANLG IN LVL
AUTO
RL
AUTO GAIN
ON
+0.0dB
+0dBMANUAL
dB
0
-6
-15
-30
-45
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
-18 to +12dB
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION
DVD1 INPUT SETUP
NAME DVD1
HDMI IN HDMI-1
DIGITAL IN
HDMI AUDIO
ANALOG IN
NONE
ANLG IN LVL
AUTO
VIDEO IN
NONE
COMPONENT IN
1
2-CH
FILM
D
5.1 FILM
FILM
5.1mc 5.1mc FILM
MIC LIVE! MED
MAIN ADVANCED
ZONE2 IN DMIX
RECORD IN DMIX
RECORD ADVANCED
INPUTSSETUP DVD1 ANGL IN LVL
INPUTSSETUP DVD1 ANGL IN LVL AUTO

Table of Contents

Other manuals for Lexicon MC-12HD

Related product manuals