Basic Operation
MPX 110
2-3
• See pages 4-2 to 4-17 for more information about
SINGLE programs.
For example, when Plate, Gate is selected:
• VARIATION knob settings 1 to 8 will load eight
different Plate program variations.
• VARIATION knob settings 9 to 16 will load eight
different Gate program variations.
When Special FX is selected:
• VARIATION knob settings 1 to 16 will each load one
program.
• See page 4-18 for more information.
DUAL PROGRAMS
When the PROGRAM knob is set to a DUAL program:
• VARIATION knob settings 1 to 16 load 16
different program variations. Each program
contains both effects.
• See pages 4-20 to 4-35 for more information about
DUAL programs.
USER PROGRAMS
When the PROGRAM knob is set to User:
• VARIATION knob settings 1 to 16 will each load one
memory location available for storing User
programs. When shipped, these locations will
contain duplicates of presets.
• See page 4-38 for more information about User
programs.
SINGLE
Programs
DUAL
Programs
User
Programs
To Next Page
Loading...
