MIDI Operation
MPX 110
5-7
CLEARING LEARNED ASSIGNMENTS
To clear a learned assignment:
1. Simultaneously press the Store and Tap buttons
to activate Learn mode. The Store LED will flash
slowly and the Tap LED will light to indicate that
Learn Mode is active.
2. Adjust the desired front panel control - Mix, Effects
Lvl/Bal, Adjust, Bypass, or Tap.
Note:
Be careful that any attached MIDI device (such as
a footpedal) does not accidentally send any
learnable message. If it does, that will be learned
as a new patch.
3. Press Store to clear the assignment. The Store LED
will flash quickly.
4. To clear another front panel assignment, repeat steps
2 and 3.
5. Simultaneously press the Store and Tap buttons
to deactivate Learn Mode.
Learnable Front Panel Controls
and Assignable MIDI Sources
Front Panel Controllers Pgm Change
Control 1 to 31, 33 to 119 100 to 127 *
Mix Yes No
Effects Lvl/Bal Yes No
Adjust Yes No
Bypass Yes Yes
Tap Yes Yes
* Program Change numbers 0 to 15 will be ignored, except on the
MIDI channel assigned the Program Load function.
To Next Page
Loading...
Need help?
General
