Basic Operation
Lexicon
2-2
ADJUST
The Adjust knob has been customized for
each individual program, and in most
cases controls several parameters at once
to handle complicated editing processes.
For instance, Adjust controls the
“liveness” of space in many Chamber and
Room programs by changing decay, EQ, and early
reflections simultaneously.
The behavior of the Adjust knob is also customized for
different functions:
• It can act as a linear control, at its
minimum value when set to the 7
o’clock position and its maximum
value when set to the 5 o’clock
position.
• It can act as a bipolar control, at its
minimum value when set to the 12
o’clock position, like a cut/boost EQ
control.
SELECTING PROGRAMS
All programs can be selected with the front panel
PROGRAM and VARIATION knobs. The PROGRAM knob
selects either a SINGLE, DUAL, or User program. SINGLE
program selections are arranged around the left side of
the knob; DUAL and User program selections are
arranged around the right side of the knob. The
VARIATION knob selects among 16 program variations,
arranged around the knob.
DARK
LIGHT
MAX
MIN
MAX
+–
SINGLE PROGRAMS
When the PROGRAM knob is set to a SINGLE program:
• VARIATION knob settings 1 to 8 will load eight
variations of the first effect.
• VARIATION knob settings 9 to 16 will load eight
variations of the second effect.
To Next Page
Loading...
