Program Descriptions
Lexicon
4-36
THE PITCH PROGRAMS
The MPX 110 features single Pitch, Pitch-Delay, and
Pitch-Reverb programs. All pitch programs are designed
to input and output two channels and to respond to
pitch-shifting in either Stereo or Dual Mono mode.
Note:
In this case, Dual Mono refers to signal type - not
routing configuration.
In Stereo mode, the same pitch-shift is applied to both
channels at the same time. This helps maintain the
proper phase relationship between the channels. When
pitch programs operate in Stereo mode, rotating the
Adjust knob will affect both channels in the same
manner.
In Dual Mono mode, pitch-shift is applied to each
channel separately. When pitch programs operate in
Dual Mono mode, rotating the Adjust knob will affect
each channel in a different manner. Sometimes one
channel may seem to experience no effect at all.
The mode in which a particular program responds to
pitch-shifting cannot be selected. The tables that begin
below list each pitch program along with its assigned
mode of operation.
Pitch VARIATIONs
1 Semi-tone Shift Stereo
2 Glide Shifter Stereo
3 ±100 cents Stereo
4 Minor 3rd to 4th Harmony Stereo
5 4th/5th Harmony Stereo
6 5th/6th Harmony Stereo
7 2nd Inversion Triad Dual Mono
8 Power Chords Dual Mono
For more information about Pitch VARIATIONs, see page 4-14.
To Next Page
Loading...
