Appendix
Lexicon
A-2
Audio Inputs (2)
Level -30dBu to +4dBu
Impedance 500K unbalanced
1/4-inch connectors for
direct instrument input
(unit detects a mono
input on the right
input)
Audio Outputs (2)
Level +8dBu typical
Impedance 75Ω 1/4-inch
connectors for
headphone output
(right used for mono
output; left used for
stereo headphones)
Digital Audio Output
Connector 24-bit digital S/PDIF
output (always active)
Coaxial RCA
Sample Rate 44.1kHz
Footswitch
Tip/Ring/Sleeve phone jack for Bypass
and Tap (optional)
Frequency Response
Wet/Dry 20Hz-20kHz, ±1dB
THD+N
<0.05%, 20Hz-20kHz
Dynamic Range
A/A >95dB typical,
20Hz-20kHz,
unweighted
A/D >100dB typical,
20Hz-20kHz,
unweighted
Conversion 24-bits analog-to-digital,
24-bits digital-to-analog,
44.1kHz sample rate
Crosstalk >45dB
Internal Audio Data Path
DSP 24-bit
Power Requirements
9VAC wall transformer provided in North
America and Europe
No-transformer option available
Dimensions
Width 19 inches (483mm)
Height 1.75 inches (45mm)
Depth 4 inches (102mm)
Weight
2 pounds, 2 ounces (0.959kg)
Environment
Operating 32 to 104°F (0 to 40°C)
Temperature
Relative 95% Non-condensing
Humidity
Specifications are subject to change without notice.
SPECIFICATIONS
To Next Page
Loading...
