12 Close the front cover.
13 Press Start/Stop to load the paper to Top-Of-Form and put the printer online.
If Auto Tear Off is set to On, the printer moves the paper to the Tear Off bar.
Note: When you use the push tractor to print continuous forms, line spacing within the first 1.5 inches of the first
form may not be uniform.
Front loading continuous forms using the pull tractor
Make sure the tractor is in the pull position.
Note: If you have installed the optional Auto Sheet Feeder or Tractor 2, see the documentation that came with your
option for paper loading instructions.
1 Turn the printer on.
2 Make sure the paper path is clear.
Note: If a cut form or envelope is loaded in the printer, press FormFeed to remove it.
3 Set the forms thickness lever to a setting corresponding with the paper thickness you are using.
4 Remove the ribbon access cover.
5 Move the paper select lever down to the position.
Loading paper
29
To Next Page
Loading...
