Notes:
• You may be prompted to enter a PIN if the computer requires it. To assign a computer name and a PIN to the
network computer, see the Help for the printer software associated with your operating system.
• Use the arrow buttons to increase or decrease the value for each digit (the default value is 0000) in the PIN,
and then press each time you select a digit.
6 Wait until the printer has finished downloading the scan applications list.
7 Press the arrow buttons until the application that you want appears, and then press .
8 Press .
Canceling scan jobs
Using the printer control panel
To cancel a scan job started in the printer control panel, press .
Using Windows
To cancel a scan job started in the Lexmark Productivity Studio, click Stop on the computer screen.
Using Macintosh
To cancel a scan job started in the Lexmark All-in-One Center, click Cancel on the computer screen.
91
To Next Page
Loading...
