203 and 230 paper jams
1 If the jam is in the standard exit bin, grasp the paper and pull it away from the bin.
2 If the jam is under the rollers near the fuser:
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the front door open
longer than 10 minutes.
a Open the front door, and then open the top cover.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching.
b Grasp the paper on each side, and pull it out gently.
c Close the top cover, and then close the front door.
3 If the jam is between the front door and Tray 1:
a Remove Tray 1.
b Open the front door.
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the front door
open longer than 10 minutes.
Clearing jams 153
To Next Page
Loading...
