Lexmark C746 - Fuser Life Warning; Replace Fuser; Fuser Missing; Waste Toner Bottle Nearly Full

80.xx Fuser life warning
• Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the
instruction sheet that came with the replacement part.
• Select Continue to clear the message and continue printing. For non‑touch‑screen printers, press to confirm.
80.xx Replace fuser
1 Replace the fuser, following the instruction sheet that came with the replacement part.
2 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to
confirm.
80.xx Fuser missing
Reinsert the fuser into the printer.
For instructions on installing the fuser, select More Information on the printer control panel.
82.xx Waste toner bottle nearly full
Make sure a replacement waste toner bottle has been ordered.
1 Replace the waste toner bottle.
For instructions on installing the waste toner bottle, select More Information on the printer control panel.
2 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to
confirm.
82.xx Replace waste toner bottle
1 Replace the waste toner bottle.
For instructions on replacing the waste toner bottle, select More Information on the printer control panel.
2 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to
confirm.
82.xx Waste toner bottle missing
1 Reinsert the waste toner bottle into the printer.
For instructions on installing the waste toner bottle, select More Information on the printer control panel.
2 Select Continue to clear the message and continue printing. For non-touch-screen printer models, press to
confirm.
Troubleshooting 227