Notes:
• All four photoconductors should be replaced at the same time.
• Make sure to reset the maintenance counter after replacing the photoconductors for optimum print quality.
3 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to
confirm.
84.xx Replace [color] photoconductor
1 Replace the photoconductor, following the instruction sheet that came with the replacement supply.
Notes:
• All four photoconductors should be replaced at the same time.
• Make sure to reset the maintenance counter after replacing the photoconductors for optimum print quality.
2 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to
confirm.
84.xx [Color] photoconductor missing
Install the specified color photoconductor.
For instructions on installing the photoconductor, select More Information on the printer control panel.
88.xx [color] cartridge nearly low
Order a replacement for the specified toner cartridge.
88.xx [color] cartridge low
1 Remove the specified cartridge.
Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.
2 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner.
3 Reinsert the cartridge, and then touch Continue to clear the message and continue printing.
Notes:
• Repeat this procedure multiple times until the print remains faded. When the print remains faded, replace the
cartridge.
• Have a new cartridge available when the current one no longer prints satisfactorily.
Troubleshooting 229
To Next Page
Loading...
