[x]‑page jam, clear standard bin [203.xx]
1 Open the top door.
2 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3 Open the front door.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
a If there is a jammed paper under the fuser, then firmly grasp
the paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
b Pull the green lever to open the fuser cover.
c If there is a jammed paper in the fuser, then hold down the
fuser cover, and then remove the paper.
Note: Make sure all paper fragments are removed.
18
To Next Page
Loading...
