1 Length guide tab
2 Paper size indicator
3 Width guide tab
Loading the multipurpose feeder
1 Push the multipurpose feeder latch to the left.
2 Open the multipurpose feeder.
3 Pull the multipurpose feeder extender.
Note: Guide the extender gently so that the multipurpose feeder
is fully extended and open.
4 Prepare the paper for loading.
• Flex the sheets of paper back and forth to loosen them, and
then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
• Hold transparencies by the edges, and then fan them.
Straighten the edges on a level surface.
Note: Avoid touching the printable side of transparencies.
Be careful not to scratch them.
• Flex a stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
8
To Next Page
Loading...
