Lexmark CX510 - Using MyShortcut; Setting up Multi Send

4 Slide the paper guide until it lightly rests against the edge of the
paper stack.
1
2
5 From the printer control panel, touch Done to clear the message
and continue printing.
[x]‑page jam, open automatic feeder top
cover [28y.xx]
1 Remove all original documents from the ADF tray.
Note: The message is cleared when the pages are removed from
the ADF tray.
2 Open the ADF cover.
3 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
4 Close the ADF cover.
5 Straighten the edges of the original documents, then load the
documents into the ADF, and then adjust the paper guide.
6 From the printer control panel, touch Done to clear the message
and continue printing.
23