3 Pull the green lever to open the fuser cover.
4 Hold down the fuser cover, and then remove the jammed paper.
Note: Make sure all paper fragments are removed.
5 Slide and hold the release latch on the right side of the printer, and
then slowly close the top door.
6 Close the front door.
7 From the printer control panel, touch Done to clear the message
and continue printing.
[x]‑page jam, open front door [20y.xx]
1 Open the front door.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
2 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
20
To Next Page
Loading...
