1 Staple finisher
Note: Not supported if another
finisher
is installed.
2 Optional 2 x 520-sheet tray
3 Staple, hole punch finisher
Note: Supported only if the optional trays or an optional spacer is installed.
4 Trifold/Z‑fold finisher
Note: Supported only if the optional trays or an optional spacer is installed.
5 Booklet finisher
Note: Supported only if the optional trays or an optional spacer is installed.
6 Optional 2000-sheet tandem tray
7 Optional 2000-sheet tray
8 Paper transport
Note: Supported only if the booklet
finisher
or staple, hole punch
finisher
is installed.
Using the control panel
Control panel part Function
1 Power button
• Turn on or turn o the printer.
Note: To t u r n
o
the printer, press and hold the power button for
five
seconds.
• Set the printer to Sleep mode.
• Wake the printer from Sleep or Hibernate mode.
2 Display
• View the printer messages and supply status.
• Set up and operate the printer.
3 Indicator light Check the status of the printer.
Learn about the printer 14
To Next Page
Loading...
Need help?
General
