Lexmark CX942 - Creating a Booklet from Copied Documents; Folding Copies; Using Offset Stacking in Copies; Creating a Copy Shortcut

Creating a booklet from copied documents
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the home screen, touch Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Tou ch Create Booklet, enable the setting, and then select a mode.
4 Copy the document.
Folding copies
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the home screen, touch Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Tou ch Finishing, touch Fold, and then select a fold setting.
4 Copy the document.
Using oset stacking in copies
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the home screen, touch Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Tou ch
Oset
Pages, and then select a setting.
4 Copy the document.
Creating a copy shortcut
1 From the home screen, touch Copy.
2 Configure the settings, and then touch .
3 Create a shortcut.
Copy 195