Lexmark CX942 - Copying Multiple Pages Onto a Single Sheet; Copying Cards; Stapling Copies; Punching Holes in Copies

Copying multiple pages onto a single sheet
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Copy > Pages per Side.
3 Adjust the settings.
4 Copy the document.
Copying cards
1 Load a card on the scanner glass.
2 From the home screen, touch Copy > Copy From.
3 Tou ch ID Card.
4 Copy the card.
Stapling copies
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the home screen, touch Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Tou ch Finishing > Staple, and then select the staple setting.
4 Copy the document.
Punching holes in copies
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the home screen, touch Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Tou ch Finishing > Punch, and then select the hole punch setting.
4 Copy the document.
Copy 194