Lexmark CX942 - Page 407

Action Yes No
Step 3
a Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.
Notes:
• Make sure that the settings match the paper loaded in
the tray.
• You can also change the settings on the printer control
panel. From the home screen, touch Settings > Paper >
Tray Configuration > Paper Size/Type.
b Print the document.
Is the print mottled?
Go to step 4. The problem is
solved.
Step 4
a Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store
paper in its original wrapper until you are ready to use it.
b Print the document.
Is the print mottled?
Go to step 5. The problem is
solved.
Step 5
a Remove the photoconductor units.
Warning—Potential Damage: Do not expose
thephotoconductor units to direct light. Extended exposure to
light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drums. Doing so may aect the quality of
future print jobs.
b Insert the photoconductor units.
c Print the document.
Is the print mottled?
Contact
customer
support.
The problem is
solved.
Paper curl
Troubleshoot a problem 407