Lexmark CX942 - Page 409

Action Yes No
Step 1
a Pull out the tray.
b Remove the paper, and then load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store
paper in its original wrapper until you are ready to use it.
c Adjust the paper guides in the tray to the correct position for
the paper loaded.
d Insert the tray.
e Print the document.
Is the print crooked or skewed?
Go to step 2. The problem is
solved.
Step 2
a Make sure that you are printing on a supported paper.
b Print the document.
Is the print crooked or skewed?
Contact
customer
support.
The problem is
solved.
Solid color or black images
Note: Before solving the problem, print the Print Quality Test Pages. From the home screen, touch Settings >
Troubleshooting > Print Quality Test Pages.
Action Yes No
a Remove the photoconductor units.
Warning—Potential Damage: Do not expose the
photoconductor units to direct light. Extended exposure to
light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drums. Doing so may aect the quality of
future print jobs.
b Insert the photoconductor units.
c Print the document.
Is the printer printing solid color or black images?
Contact
customer
support.
The problem is
solved.
Troubleshoot a problem 409