• Load prepunched paper facedown with the holes against the right side of the tray.
For two‑sided, short‑edge printing
•
Load letterhead facedown with the header toward the left side of the tray.
• Load prepunched paper facedown with the holes against the back of the tray.
Notes:
• Do not slide paper into the tray.
• Make sure that the side guides fit snugly against the paper.
• Make sure that the stack height is below the maximum paper fill indicator. Overfilling may cause
paper jams.
Set up, install, and configure 64
To Next Page
Loading...
