Understanding the operator panel lights
61
Understanding the operator panel lights
What this light sequence means:
The printer has a service error and printing has
stopped.
What you can do:
Turn the printer off and back on. If the lights are still
blinking, contact the place where you bought your
printer.
Secondary error code
What this light sequence means:
The printer has one of the following errors:
• Memory is full.
• A page is too complex to print.
• A page is shorter than the set page margins.
• Resolution of a formatted page is reduced to
300 dpi before printing.
• A font error occurred.
• Memory is insufficient to save what is in the
buffer.
• Printer memory is insufficient to defragment
flash memory.
• Communication with the host computer is lost.
–Continued–
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
To Next Page
Loading...
