Lexmark E260d Series User Manual

Light sequence What you can do
Cartridge is low
- On
- On
• Press and release to clear
the light sequence and
continue processing the print
job.
• With the printer turned off,
remove the toner cartridge and
shake it to extend its life.
• Replace the toner cartridge,
and then turn the printer on.
PC Kit life warning
- Blinking
- On
• Press and release to clear
the light sequence and
continue processing the print
job.
• Replace the photoconductor
kit.
The following light sequences show that there is a secondary error code or secondary jam code to read:
Light sequence What you can do
Printer error
- On
- On
Press twice quickly to see the
secondary error code.
Interpreting the printer control panel lights
35

Lexmark E260d Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Connectivity	USB 2.0, Parallel
Monthly Duty Cycle	Up to 50, 000 pages
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Input Capacity	250-Sheet Input Tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Executive, Folio, Letter, Legal, Statement, Universal
Maximum Paper Size	8.5 x 14 inches
Duplex Printing	Standard
Recommended Monthly Page Volume	500 - 2, 500 pages