Lexmark MB2236 - Page 100

Menu item Description
Logs Display
Remote Fax Name*
Dialed Number
Identify the sender by remote fax name or fax number.
Enable Job Log
On*
O
View a summary of all fax jobs.
Enable Call Log
On*
O
View a summary of fax dialing history.
Note: An asterisk (*) next to a value indicates the factory default setting.
Speaker settings
Menu item Description
Speaker Mode
Always
O*
Always On
On until Connected
Set the fax speaker mode.
Speaker Volume
Low*
High
Adjust the fax speaker volume.
Ringer Volume
O*
On
Enable the ringer volume.
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Server Setup
Note: This menu is available only in some printer models
General Fax Settings
Menu item Description
To Forma t Specify a fax recipient.
Note: If you want to use the fax number, then type the number sign (#) before
a number.
Reply Address Specify a reply address for sending fax.
Subject Specify the fax subject and message.
Message
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 100