Lexmark MB2236 - Reducing or enlarging copies

3 Copy the document.
Copying on letterhead
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
> Copy > Copy from > select the size of the original document
For non-touch-screen printer models, press
to navigate through the settings.
3 Select Copy To, and then select the paper source that contains the letterhead.
If you loaded the letterhead into the manual feeder, then navigate to:
Copy To > Manual Feeder > select a paper size > Letterhead
4 Copy the document.
Copying on both sides of the paper
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
> Copy > Sides
For non-touch-screen printer models, press
to navigate through the settings.
3 Adjust the setting.
4 Copy the document.
Reducing or enlarging copies
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
> Copy > Scale > specify a scale value
For non-touch-screen printer models, press
to navigate through the settings.
Note: Changing the size of the original document or output after setting Scale restores the scale value to
Auto.
3 Copy the document.
Copy 60