c From the Shortcut Type menu, select FTP, and then configure the settings.
d Apply the changes.
2 Load an original document into the ADF tray or on the scanner glass.
3 From the control panel, navigate to:
Shortcuts > FTP
For non-touch-screen printer models, press
to navigate through the settings.
4 Select the shortcut.
5 Scan the document.
Scanning to a network folder
1 Create a network folder shortcut.
a Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
b Click Shortcuts > Add Shortcut.
c From the Shortcut Type menu, select Network Folder, and then
configure
the settings.
d Apply the changes.
2 Load an original document into the ADF tray or on the scanner glass.
3 From the home screen, navigate to:
Shortcuts > Network Folder
For non-touch-screen printer models, press
to navigate through the settings.
4 Select the shortcut.
Scanning to a Cloud Connector profile
This feature is available only in some printer models.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Cloud Connector.
3 Select a cloud service provider, and then select a profile.
Note: For more information on creating a Cloud Connector
profile,
see
“Creating a Cloud Connector
profile”
on page 51.
4 Touch Scan, and then assign a filename and destination folder.
Scan 72
To Next Page
Loading...
