Lexmark MB2236 - Printing from a Cloud Connector Profile; Printing a Font Sample List

For Macintosh users
Using AirPrint
1 With a document open, choose File > Print.
2 Select a printer, and then from the drop-down menu following the Orientation menu, choose PIN Printing.
3 Enable Print with PIN, and then enter a four‑digit PIN.
4 Click Print.
5 From the printer control panel, release the print job. Navigate to:
Held jobs > select your computer name >
Confidential
> enter the PIN > select the print job > Print
For non-touch-screen printer models, press
to navigate through the settings.
Using the print driver
1 With a document open, choose File > Print.
2 Select a printer, and then from the drop-down menu following the Orientation menu, choose Print and Hold.
3 Choose
Confidential
Print, and then enter a four‑digit PIN.
4 Click Print.
5 From the printer control panel, release the print job. Navigate to:
Held jobs > select your computer name > Confidential > select the print job > enter the PIN > Print
For non-touch-screen printer models, press
to navigate through the settings.
Printing from a Cloud Connector profile
This feature is available only in some printer models.
1 From the home screen, touch Cloud Connector.
2 Select a cloud service provider, and then select a
profile.
Note: For more information on creating a Cloud Connector
profile,
see
“Creating a Cloud Connector
profile”
on page 51.
3 Touch Print, and then select a file.
If necessary, change the settings.
Note: Make sure to select a supported
file.
4 Print the document.
Printing a font sample list
1 From the control panel, navigate to:
Settings > Reports > Print > Print Fonts
For non-touch-screen printer models, press
to navigate through the settings.
2 Select PCL Fonts.
Print 57