Lexmark MB2236 - Blocking junk faxes

Changing the fax resolution
Note: Make sure that fax is
configured.
For more information, see “Setting up the printer to fax” on page 23.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
Fax > Resolution
For non-touch-screen printer models, press
to navigate through the settings.
3 Select a setting.
4 Send the fax.
Adjusting the fax darkness
Note: Make sure that fax is configured. For more information, see “Setting up the printer to fax” on page 23.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
Fax > Darkness
For non-touch-screen printer models, press
to navigate through the settings.
3 Select a setting.
4 Send the fax.
Printing a fax log
Note: Make sure that fax is configured. For more information, see “Setting up the printer to fax” on page 23.
1 From the control panel, navigate to:
Settings > Reports > Fax
For non-touch-screen printer models, press
to navigate through the settings.
2 Select Fax Job Log or Fax Call Log.
Blocking junk faxes
Note: Make sure that fax is configured. For more information, see “Setting up the printer to fax” on page 23.
1 From the home screen, navigate to:
Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls
For non-touch-screen printer models, press
to navigate through the settings.
2 Set Block No Name Fax to On.
Fax 67