Lexmark MB2236 - Page 110

Menu item Description
Auto Color Detect
Color Sensitivity
1–9 (5*)
Area Sensitivity
1–9 (5*)
FTP Bit Depth
1 bit*
8 bit
Minimum Scan Resolution
75 dpi
150 dpi
200 dpi
300 dpi*
Set the amount of color that the printer detects from the original document.
Contrast
Best for content*
0
1
2
3
4
5
Specify the contrast of the output.
Background Removal
Level
‑4 to 4 (0*)
Adjust the amount of background visible on a scanned image.
Scan Edge to Edge
On
O*
Allow edge‑to‑edge scanning of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item Description
Text Defa ult
5–95 (75*)
Set the quality of text on a scanned image.
Text/Photo Defau lt
5–95 (75*)
Set the quality of text or photo image on a scanned image.
Photo Default
5–95(50*)
Set the quality of a photo image on a scanned image.
Transmission Log
Print Log*
Do Not Print Log
Print Only For Error
Print a log for successful FTP scan transmission.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 110