Lexmark MB2236 - Page 124

Menu item Description
Enable IPSec
O*
On
Enable Internet Protocol Security (IPSec).
Base Configuration
Default*
Compatibility
Secure
Set the IPSec base configuration.
Note: This menu item appears only when Enable IPSec is set to
On.
DH (Die‑Hellman) Group Proposal
modp2048 (14)*
modp3072 (15)
modp4096 (16)
modp6144 (17)
Set the IPSec encryption.
Note: This menu item appears only when Base
Configuration
is set
to Compatibility.
Proposed Encryption Method
AES*
3DES
Specify an encryption method.
Note: This menu item appears only when Base Configuration is set
to Compatibility.
Proposed Authentication Method
SHA256*
SHA512
SHA1
Specify an authentication method.
Note: This menu item appears only when Base
Configuration
is set
to Compatibility.
IKE SA Lifetime (Hours)
‑1
‑2
‑4
‑8
‑24
Specify the IKE SA expiry period.
Note: This menu item appears only when Base
Configuration
is set
to Secure.
IPSec SA Lifetime (Hours)
‑1
‑2
‑4
‑8
‑24
Specify the IPSec SA expiry period.
Note: This menu item appears only when Base Configuration is set
to Secure.
IPSec Device Certificate
default
Specify an IPSec certificate.
Note: This menu item appears only when Base
Configuration
is set
to Compatibility or Secure.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 124