Lexmark MB2236 - Page 194

Poor fax print quality
Action Yes No
Step 1
Make sure that there are no print quality defects.
a From the control panel, navigate to:
Settings > Troubleshooting > Print Quality Test Pages
For non-touch-screen printer models, press
to navigate
through the settings.
b Correct any print quality defects. For more information, see
“Print quality is poor” on page 147.
Is the fax print quality satisfactory?
The problem is
solved.
Go to step 2.
Step 2
Decrease the incoming fax transmission speed.
a From the control panel, navigate to:
Settings > Fax > Fax Setup > Fax Receive Settings > Admin
Controls > Max Speed
For non-touch-screen printer models, press
to navigate
through the settings.
b Select a lower transmission speed.
Is the fax print quality satisfactory?
The problem is
solved.
Contact
customer
support.
Missing information on the fax cover page
Action No Yes
a Turn o the printer, wait for about 10 seconds, and then turn on
the printer.
b Send or retrieve the fax.
Is there missing information on the fax cover page?
The problem is
solved.
Contact
customer
support.
Cannot send the fax cover page from the computer
Action Yes No
Step 1
a Make sure that the print driver is updated. For more information,
see
“Installing the printer software” on page 44.
b Send the fax.
Can you send the fax cover page?
The problem is
solved.
Go to step 2.
Troubleshoot a problem 194