1
2
3
4
5
1
1 Right side 300 mm (12 in.)
2 Front 510 mm (20 in.)
3 Left side 200 mm (8 in.)
4 Rear 200 mm (8 in.)
5 Top 540 mm (21 in.)
Printer configurations
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability.
You must use either a printer stand or printer base if you are using multiple input options. If you
purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional
furniture. For more information, see
www.lexmark.com/multifunctionprinters.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding an optional 250‑ or 550‑sheet tray. For instructions on installing the
optional tray, see
“Installing optional trays” on page 20.
Learning about the printer 11
To Next Page
Loading...
