Paper menu
Default Source menu
Use To
Default Source
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Notes:
• Tray 1 (standard tray) is the factory default setting.
• From the Paper menu, set Configure MP to "Cassette" for MP Feeder
to appear as a menu setting.
• If two trays contain paper of the same size and type, and the trays
have the same settings, then the trays are automatically linked.
When one tray is empty, the print job continues using the linked tray.
Paper Size/Type menu
Use To
Tray [x] Size
A4
A5
A6
JIS B5
Letter
Legal
Executive
Oficio
(Mexico)
Folio
Statement
Universal
Specify the size of the paper loaded in each tray.
Notes:
• Letter is the U.S. factory default setting. A4 is the international
factory default setting.
• If the same size and type of paper are loaded in two trays and the
tray settings for paper size and type match, then the trays are
automatically linked. The multipurpose feeder may also be linked.
When one tray is empty, the job prints using paper from the linked
tray.
• A6 is supported only in Tray 1 and in the multipurpose feeder.
Tray [x] Type
Plain Paper
Transparency
Recycled
Labels
Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton
Custom Type [x]
Specify the type of the paper loaded in each tray.
Notes:
• Plain Paper is the factory default setting for Tray 1. Custom Type [x]
is the factory default setting for all other trays.
• If available, a user‑
defined
name will appear instead of Custom
Type [x].
• Use this menu to
configure
automatic tray linking.
Note: Only installed trays and feeders are listed in this menu.
Understanding the printer menus 94
To Next Page
Loading...
