Lexmark MX310 - Solving scanner problems

Action Yes No
Step 2
Decrease the incoming fax transmission speed.
a Open a Web browser, and then type the printer IP address in
the address field.
Notes:
• View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets
of numbers separated by periods, such as
123.123.123.123.
• If you are using a proxy server, then temporarily disable it
to load the Web page correctly.
b Click Settings > Fax Settings > Analog Fax Setup.
c In the Max Speed menu, click one of the following:
• 2400
• 4800
• 9600
• 14400
• 33600
d Click Submit.
e Resend the fax.
Is the fax print quality satisfactory?
The problem is
solved.
Go to step 3.
Step 3
Replace the toner cartridge.
When Cartridge low [88.xy] appears, replace the
cartridge, and then resend the fax.
Is the fax print quality satisfactory?
The problem is
solved.
Contact
customer
support.
Solving scanner problems
• “The scanner does not respond” on page 232
• “Scan job was not successful” on page 233
• “Scanner unit does not close” on page 233
• “Scanning takes too long or freezes the computer” on page 233
• “Poor scanned image quality” on page 234
• “Partial document or photo scans” on page 235
Troubleshooting 231