Print Settings
Setup menu
Use To
Printer Language
PCL Emulation
PS Emulation
PPDS Emulation
Set the default printer language.
Notes:
• PCL Emulation is the factory default setting.
• This does not prevent a software program from sending
print jobs that use another printer language.
Print Area
Normal
Whole Page
Set the logical and physical printable area.
Note: Normal is the factory default setting. When attempting
to print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
Resource Save
On
O
Specify how the printer handles temporary downloads, such
as fonts and macros stored in the RAM, when the printer
receives a job that requires more memory than what is
available.
Notes:
• O is the factory default setting. This sets the printer to
retain the downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
• On retains the downloads during language changes and
printer resets. If the printer runs out of memory, then
Memory Full [38] appears and downloads are not
deleted.
Print All Order
Alphabetical
Oldest First
Newest First
Specify the order in which confidential and held jobs are
printed when Print All is selected.
Note: Alphabetical is the factory default setting.
Understanding the printer menus 134
To Next Page
Loading...
