3 From the printer control panel, navigate to:
Fax >
> enter the fax number > > Darkness > adjust the darkness of the fax >
Viewing a fax log
1 Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > Reports.
3 Click Fax Job Log or Fax Call Log.
Blocking junk faxes
1 Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax.
Notes:
• This option blocks all incoming faxes that have a private caller ID or no fax name.
• In the Banned Fax List
field,
enter the phone numbers or fax names of
specific
fax callers you want to
block.
Canceling an outgoing fax
Canceling a fax job while the original documents are still scanning
• If you are using the ADF tray and Scanning page appears, then press .
• If you are using the scanner glass and Scanning page, Scan the Next Page, or Finish the Job
appears, then press
.
Canceling a fax job after scanning the original documents
1 From the printer control panel, press .
2 Press the left or right arrow button to scroll to the job you want to cancel.
Faxing 86
To Next Page
Loading...
