Use To
Fax Number Masking
O
From left
From right
Specify the direction from where digits are masked in an outgoing fax number.
Notes:
• O is the factory default setting.
• The number of characters masked is determined by the Digits to Mask
setting.
Digits to Mask
0–58
Specify the number of digits to mask in an outgoing fax number.
Note: 0 is the factory default setting.
Fax Cover Page
Fax Cover Page
O by default
On by default
Never use
Always use
Include to Field
On
O
Include from Field
On
O
Include Message Field
On
O
Include Logo
On
O
Include Footer [x]
On
O
Configure the fax cover page.
Notes:
• O by default is the factory default setting for Fax Cover Page.
• O is the factory default setting for all other menu items.
Fax Send Settings
Use To
Resolution
Standard
Fine 200 dpi
Super Fine 300 dpi
Ultra Fine 600 dpi
Specify quality in dots per inch (dpi). A higher resolution gives better print quality,
but increases the fax transmission time for outgoing faxes.
Note: Standard is the factory default setting.
Understanding the printer menus 121
To Next Page
Loading...
