Use To
Mirror Image
O
On
Create a mirror image of the original document.
Note:
O
is the factory default setting.
Negative Image
O
On
Create a negative image of the original document.
Note: O is the factory default setting.
Shadow Detail
‑4 to 4
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
Scan Edge to Edge
O
On
Specify whether the original document is scanned edge‑to‑edge.
Note: O is the factory default setting.
Sharpness
1–5
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Enable Color Fax Scans
O
by default
On by default
Never Use
Always Use
Enable color faxing.
Note: O by default is the factory default setting.
Auto Convert Color Faxes to
Mono Faxes
On
O
Convert all outgoing faxes to black and white.
Note: On is the factory default setting.
Fax Receive Settings
Use To
Enable Fax Receive
On
O
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Enable Caller ID
On
O
Allow the printer to show caller ID.
Note: On is the factory default setting.
Rings to Answer
1–25
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Auto Answer
Ye s
No
Set the printer to receive faxes automatically.
Note: Yes is the factory default setting.
Manual Answer Code
0–9
Enter a code on the telephone number pad to begin receiving a fax.
Notes:
• *9* is the factory default setting.
• This menu item is used when the printer shares a line with a telephone.
Understanding the printer menus 124
To Next Page
Loading...
