8 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the
printer.
1
2
Notes:
• When the printer software and any hardware options are installed, you may need to manually add the
options in the printer driver to make them available for print jobs. For more information, see
“Adding
available options in the print driver” on page 24.
• To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the
printer until it clicks into place, and then remove stacked trays one at a time from the top to the
bottom.
Additional printer setup 22
To Next Page
Loading...
